View Featured Offers >>
28692
5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb
Primary Antibodies
Monoclonal Antibody
R
Recombinant

5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb #28692

Citations (43)
Filter:
  1. IF
  2. DB
Confocal immunofluorescent analysis of 293T cells transfected with a construct expressing DYKDDDDK-tagged TET1 catalytic domain (TET1-CD) using 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb (green) and DYKDDDDK Tag (9A3) Mouse mAb #8146 (red). Blue pseudocolor = DRAQ5® #4084 (fluorescent DNA dye). As expected, 293T cells expressing TET1-CD (red) exhibit decreased levels of 5-methylcytosine (green).
DNA fragments from HCT 116 wild type (WT) and DNMT1/DNMT3B knock-out (KO) cells were blotted onto a nylon membrane, UV cross-linked, and probed with 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb. The top panel shows the antibody detecting more methylated cytosine in the wild type cells, while the bottom panel shows the membrane stained with methylene blue.
The specificity of 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb was determined by dot blot. The same sequence of a 387 base pair DNA fragment was generated by PCR using exclusively unmodified cytosine, 5-methylcytosine (5-mC), 5-hydroxymethylcytosine (5-hmC), 5-carboxylcytosine (5-caC), or 5-formylcytosine (5-fC). The respective DNA fragments were blotted onto a nylon membrane, UV cross-linked, and probed with 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb. The top panel shows the antibody only binding to the DNA fragment containing 5-mC, while the bottom panel shows the membrane stained with methylene blue.
DNA immunoprecipitations were performed with 1 μg of genomic DNA from NCCIT cells and either 10 μl of 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb #28692 or 10 μl of Rabbit (DA1E) mAb IgG XP® Isotype Control (DIP Formulated). The enriched DNA was quantified by real-time PCR using human Aqp2 intron 5 primers, human TIMP3 promoter primers, SimpleDIP Human Testis-Specific H2B Promoter Primers, and SimpleChIP® Human GAPDH Exon 1 Primers #5516. The amount of immunoprecipitated DNA in each sample is represented as signal relative to the total amount of input DNA, which is equivalent to one.
DNA immunoprecipitations were performed with 1 μg of genomic DNA from mouse embryonic stem cells and either 10 μl of 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb #28692 or 10 μl of Rabbit (DA1E) mAb IgG XP® Isotype Control (DIP Formulated). The enriched DNA was quantified by real-time PCR using mouse Aqp2 exon 1 primers, SimpleDIP Mouse Intracisternal-A Particle (IAP) LTR Primers, mouse Lamc3 exon 1 primers, and SimpleChIP® Mouse GAPDH Intron 2 Primers #8986. The amount of immunoprecipitated DNA in each sample is represented as signal relative to the total amount of input DNA, which is equivalent to one.
The specificity of 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb was determined by ELISA. The antibody was titrated against a single-stranded DNA oligo containing either unmodified cytosine or differentially modified cytosine (5-mC, 5-hmC, 5-caC, 5-fC). As shown in the graph, the antibody only binds to the oligo containing 5-mC.
The specificity of 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb was determined by DNA immunoprecipitations. DNA IPs were performed with genomic DNA prepared from mouse embryonic stem cells, spiked with control DNA containing either unmethylated cytosine, 5-methylcytosine (5-mC), or 5-hydroxymethylcytosine (5-hmc). IPs were performed using 5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb. The enriched DNA was quantified by real-time PCR using primers specific to the spiked-in control DNA sequence. The amount of immunoprecipitated DNA in each sample is represented as signal relative to the total amount of input DNA, which is equivalent to one.
To Purchase # 28692
Cat. # Size Qty. Price
28692S
100 µl

Supporting Data

REACTIVITY All
SENSITIVITY Endogenous
MW (kDa)
Source/Isotype Rabbit IgG

Application Key:

  • WB-Western Blot
  • IP-Immunoprecipitation
  • IHC-Immunohistochemistry
  • ChIP-Chromatin Immunoprecipitation
  • C&R-CUT&RUN
  • C&T-CUT&Tag
  • DB-Dot Blot
  • eCLIP-eCLIP
  • IF-Immunofluorescence
  • F-Flow Cytometry

Species Cross-Reactivity Key:

  • H-Human
  • M-Mouse
  • R-Rat
  • Hm-Hamster
  • Mk-Monkey
  • Vir-Virus
  • Mi-Mink
  • C-Chicken
  • Dm-D. melanogaster
  • X-Xenopus
  • Z-Zebrafish
  • B-Bovine
  • Dg-Dog
  • Pg-Pig
  • Sc-S. cerevisiae
  • Ce-C. elegans
  • Hr-Horse
  • GP-Guinea Pig
  • Rab-Rabbit
  • All-All Species Expected

Product Usage Information

Application Dilution
Immunofluorescence (Immunocytochemistry) 1:1600
DNA Dot Blot 1:1000

Storage

Supplied in 10 mM sodium HEPES (pH 7.5), 150 mM NaCl, 100 µg/ml BSA, 50% glycerol and less than 0.02% sodium azide. Store at –20°C. Do not aliquot the antibody.

Protocol

PRINT

View >Collapse >

Immunofluorescence (Immunocytochemistry)

IMPORTANT: This protocol employs an atypical fixation and denaturation strategy with which only certain targets are compatible. Where appropriate, this protocol will be linked to its validated antibody under the Product Information banner on the product-specific webpage.

A. Solutions and Reagents

    NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalently purified water.

  1. 1X Phosphate Buffered Saline (PBS): To prepare 1L 1X PBS, add 100 ml 10X Wash Buffer, Phosphate Buffered Saline (#12528) to 900 ml dH2O, mix. Adjust pH to 8.0.
  2. Ethanol , 70% solution, deionized.
  3. 1.5 M Hydrochloric acid.
  4. Blocking Buffer: Purchase ready-to-use Immunofluorescence Blocking Buffer (#12411), or prepare a 1X PBS / 5% normal serum / 0.3% Triton X-100 buffer by adding 0.5 ml normal serum from the same species as the secondary antibody (e.g., Normal Goat Serum (#5425)) and 30 µl Triton X-100 to 9.5 mL 1X PBS. Store at 4°C.
  5. Antibody Dilution Buffer: Purchase ready-to-use Immunofluorescence Antibody Dilution Buffer (#12378), or prepare a 1X PBS / 1% BSA / 0.3% Triton X-100 buffer by adding 0.1 g BSA (#9998) and 30 µl Triton X-100 to 10 mL 1X PBS. Store at 4°C.
  6. Fluorochrome-conjugated Secondary Antibody : Use a secondary antibody that is reactive to your primary antibody host species (e.g., rabbit). Click here for a list of secondary antibodies approved for immunofluorescence.

B. Fixation and Permeabilization

    NOTE: All subsequent incubations should be carried out at room temperature (20-25°C) unless noted otherwise.

  1. Aspirate media then cover specimen with ice-cold 70% ethanol (use enough to cover completely to a depth of 3 - 5 mm, DO NOT LET DRY).
  2. Allow to fix for 5 min.
  3. Rinse three times in 1X PBS for 5 min each.
  4. Aspirate PBS then incubate fixed specimen in 1.5 M HCl for 1 hour.
  5. Rinse two times in 1X PBS for 5 min each.

C. Immunostaining

  1. Block specimen in Blocking Buffer for 60 min.
  2. While blocking, prepare primary antibody in Antibody Dilution Buffer (see product website for recommended dilution range).
  3. Aspirate blocking solution then apply diluted primary antibody.
  4. Incubate overnight at 4°C.
  5. Rinse three times in 1X PBS for 5 min each.

  6. NOTE: If using a fluorochrome-conjugated primary antibody, then skip to Section C, Step 8.

  7. Incubate specimen in fluorochrome-conjugated secondary antibody diluted in Antibody Dilution Buffer for 1–2 hours protected from light.
  8. Rinse three times in 1X PBS for 5 min each protected from light.
  9. Counterstain as appropriate.

  10. NOTE: When including fluorescent cellular dyes in your experiment (DNA dyes, etc.), please refer to the dye product page for its recommended protocol. View our listing of cellular dyes validated for use in immunofluorescence.

  11. Mount specimen in an appropriate antifade reagent such as Prolong® Gold Antifade Reagent (#9071) or Prolong® Gold AntiFade Reagent with DAPI (#8961).
  12. For long-term storage, store samples at 4°C protected from light.

posted December 2015

revised December 2020

Protocol Id: 865

DNA Dot Blot Protocol

A. Buffers and Reagents

  1. 20X Saline Sodium Citrate (SSC) Buffer: 3.0 M NaCl, 0.3 M Sodium Citrate, pH to 7.0.
  2. 10X SSC Buffer: Dilute 20X SSC buffer 1:2.
  3. 2X DNA Denaturing Buffer: 200 mM NaOH, 20 mM EDTA.
  4. Nuclease-Free Water: (#12931)
  5. Blotting Membrane: This protocol has been optimized for positively charged nylon membranes.
  6. 96-Well Dot Blot Apparatus
  7. 10X Tris Buffered Saline with Tween® 20 (TBST): (#9997) To prepare 1 L 1X TBST: add 100 ml 10X TBST to 900 ml dH2 0, mix.
  8. Nonfat Dry Milk: (#9999)
  9. Blocking Buffer: 1x TBST with 5% w/v nonfat dry milk; for 150 ml, add 7.5 g nonfat dry milk to 150 ml 1X TBST and mix well.
  10. Bovine Serum Albumin (BSA): (#9998)
  11. Primary Antibody Dilution Buffer: 1X TBST with 5% BSA; for 20 ml, add 1.0 g BSA to 20 ml 1X TBST and mix well.
  12. Secondary Antibody Conjugated to HRP: anti-rabbit (#7074); anti-mouse (#7076).
  13. Detection Reagent LumiGLO® chemiluminescent reagent and peroxide (#7003) or SignalFire™ ECL Reagent (#6883)

B. Dot Blot

Note: This protocol is written for spotting fragmented, purified genomic DNA (titration of 1000 ng, 500 ng, 250 ng, 125 ng, 62.5 ng, 31.25 ng, and 15.625 ng) onto a positively charged nylon membrane using a 96-well dot blotting apparatus. Depending on the source and type of DNA, more or less DNA may be required for detection with the antibody.
Before Starting:
• Purify genomic DNA using a genomic DNA purification protocol or kit and sonicate
genomic DNA to generate fragments between 200 and 500 bp. DNA fragment size
can be analyzed by gel electrophoresis on a 1% agarose gel with a 100 bp DNA
marker.
• Cut a piece of nylon membrane to the size of the dot blot manifold.
• Wet nylon membrane with 10x SSC Buffer.
• Dry membrane by placing it in 96-well dot blot apparatus and applying vacuum.

  1. Dilute fragmented genomic DNA to 100 ng/μl in 100 ul of nuclease-free water.
    Then denature DNA by adding 100 μl of 2X DNA Denaturing Buffer and incubating at 95°C for 10 min.
  2. Add 200 μl of 20X SSC buffer and immediately chill on ice for 5 min.
  3. Add 100 μl of nuclease-free water to bring DNA solution to a final volume of 500 μl with a DNA concentration of 20 ng/μl.
  4. Set up a series of six 2-fold dilutions by adding 250 μl of the DNA solution, starting with the DNA solution in Step 3, to 250 μl of nuclease-free water. This will generate seven DNA samples containing 250 μl DNA at concentrations of 20 ng/μl, 10 ng/μl, 5 ng/μl, 2.5 ng/μl, 1.25 ng/μl, 0.625 ng/μl, and 0.3125 ng/μl.
  5. Apply 50 μl of each of the seven dilution samples into separate wells of the 96-well dot blot apparatus, leaving the last well for nuclease-free water only. The amount of DNA added to each well should then be 1000 ng, 500 ng, 250 ng, 125 ng, 62.5 ng, 31.25 ng, 15.625 ng and 0 ng respectively. Apply gentle vacuum pressure to draw solution through the membrane. Nylon membrane should be mostly dry before step 6.
  6. Remove nylon membrane from the 96-well dot blot apparatus and wrap in plastic wrap.
  7. UV cross-link nylon membrane at 1200 J/m2.

C. Membrane Blocking and Antibody Incubation

  1. Incubate membrane in 25 ml of blocking buffer with gentle agitation for 1 hr at room temperature.
  2. Wash membrane three times for 5 min each with 15 ml of 1X TBST.
  3. Incubate membrane and primary antibody (at the appropriate dilution and diluent as recommended in the antibody product datasheet) in 10 ml primary antibody dilution buffer, with gentle agitation overnight at 4°C.
  4. Wash three times for 5 min each with 15 ml of 1X TBST.
  5. Incubate membrane with the species appropriate HRP-conjugated secondary antibody (#7074 Anti-rabbit IgG, HRP-linked Antibody or #7076 Anti-mouse IgG, HRP-linked Antibody) at 1:2000 in 10 ml of blocking buffer with gentle agitation for 1 hr at room temperature.
  6. Wash membrane three times for 5 min each with 15 ml of 1X TBST.
  7. Proceed with detection (Section D)

D. Detection of DNA

  1. Incubate membrane with 10 mL of LumiGLO® (0.5 ml 20x LumiGLO® #7003, 0.5 ml 20x Peroxide, and 9.0 ml purified water) or 10 ml SignalFire™ #6883 (5 ml Reagent A, 5 ml Reagent B) with gentle agitation for 1 min at room temperature.
  2. Drain membrane of excess developing solution (do not let dry), wrap in plastic wrap and expose to x-ray film. An initial 10 sec exposure should indicate the proper exposure time.

NOTE: Due to the kinetics of the detection reaction, signal is most intense immediately following incubation and declines over the following 2 hr

posted November 2015

Protocol Id: 804

Specificity / Sensitivity

5-Methylcytosine (5-mC) (D3S2Z) Rabbit mAb recognizes endogenous levels of 5-methylcytosine. This antibody has been validated using ELISA, dot blot, and MeDIP assays and shows high specificity for 5-methylcytosine.

Species Reactivity:

All Species Expected

Source / Purification

Monoclonal antibody is produced by immunizing animals with 5-methylcytidine.

Background

Methylation of DNA at cytosine residues is a heritable, epigenetic modification that is critical for proper regulation of gene expression, genomic imprinting, and mammalian development (1,2). 5-methylcytosine is a repressive epigenetic mark established de novo by two enzymes, DNMT3a and DNMT3b, and is maintained by DNMT1 (3, 4). 5-methylcytosine was originally thought to be passively depleted during DNA replication. However, subsequent studies have shown that Ten-Eleven Translocation (TET) proteins TET1, TET2, and TET3 can catalyze the oxidation of methylated cytosine to 5-hydroxymethylcytosine (5-hmC) (5). Additionally, TET proteins can further oxidize 5-hmC to form 5-formylcytosine (5-fC) and 5-carboxylcytosine (5-caC), both of which are excised by thymine-DNA glycosylase (TDG), effectively linking cytosine oxidation to the base excision repair pathway and supporting active cytosine demethylation (6,7).
Normally DNA methylation occurs in a bimodal fashion, such that CpG dinucleotides are largely methylated across the genome, except in short stretches of CpG-rich sequences associated with gene promoters, known as CpG-islands, where methylation is virtually absent (8). Cancer cell genomes often undergo global hypomethylation, while CpG-islands become hypermethylated, causing their associated promoters to become repressed (9). There is evidence that a number of aberrantly hypermethylated CpG-islands found in carcinomas occur at tumor suppressor genes such as RB1, MLH1, and BRCA1 (10).

Limited Uses

Except as otherwise expressly agreed in a writing signed by a legally authorized representative of CST, the following terms apply to Products provided by CST, its affiliates or its distributors. Any Customer's terms and conditions that are in addition to, or different from, those contained herein, unless separately accepted in writing by a legally authorized representative of CST, are rejected and are of no force or effect.

Products are labeled with For Research Use Only or a similar labeling statement and have not been approved, cleared, or licensed by the FDA or other regulatory foreign or domestic entity, for any purpose. Customer shall not use any Product for any diagnostic or therapeutic purpose, or otherwise in any manner that conflicts with its labeling statement. Products sold or licensed by CST are provided for Customer as the end-user and solely for research and development uses. Any use of Product for diagnostic, prophylactic or therapeutic purposes, or any purchase of Product for resale (alone or as a component) or other commercial purpose, requires a separate license from CST. Customer shall (a) not sell, license, loan, donate or otherwise transfer or make available any Product to any third party, whether alone or in combination with other materials, or use the Products to manufacture any commercial products, (b) not copy, modify, reverse engineer, decompile, disassemble or otherwise attempt to discover the underlying structure or technology of the Products, or use the Products for the purpose of developing any products or services that would compete with CST products or services, (c) not alter or remove from the Products any trademarks, trade names, logos, patent or copyright notices or markings, (d) use the Products solely in accordance with CST Product Terms of Sale and any applicable documentation, and (e) comply with any license, terms of service or similar agreement with respect to any third party products or services used by Customer in connection with the Products.

For Research Use Only. Not for Use in Diagnostic Procedures.
Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
SimpleChIP is a registered trademark of Cell Signaling Technology, Inc.
XP is a registered trademark of Cell Signaling Technology, Inc.
All other trademarks are the property of their respective owners. Visit our Trademark Information page.